Meeting 6

Meeting Report

MINUTE OF MEETING  GROUP 4B SITE NO.8

Date: 15 November 2015 (Sunday)

Time: 8.00 pm-12.00

Venue: DUP,USM

_____________________________________________________

Presence:

1. Aziman Raziq Bin Rizaman ( Chairman )
2. Aimi Zahirah Binti Zulkarnain (Assist. Chairman)
3. Nor Syafiqah Athirah Binti Mohd Shaifulah (Secretary)
4. Wee Chew Teng (Assist.Secretary)
5. Tan Jo yen (Treasures)
6. Lee Ter Soon
7. Ng Yii Rou
8. Azreen Sabrina Binti Ab Halim
9. Faiz Solehin Bin Shafikhullah
10. Fatin Nabila Binti Abdull Rahman
11. Goh Su Chen
12. Hanisah Binti Amiruddin
13. Nur Nabilah Binti Mohamad Bakhtiar
14. Muhammas Hakeen Bin Mohd Mahayuddeen
15. Nur Syahirah Binti Ali
16. Nurman Bin Razali
17. Goh Jie Xin

Chairman Remark

The chairman begins the meeting with salam remarks and welcome to the members who present in the meeting.

Minute 1 : The new precedent studies ( Updated )

Due to the problem of the original precedent studies from the crit session, Aimi is present two precedent to all member about our new precedent studies.

The 1st precedent studies is come from Rising Moon Pavilion(Hong Kong).

This is temporary pavilion for 2013 Hong Kong Mid-Autumn Festival. As a temporary pavilion, the designers using thousands of polycarbonate plastic bottles that were recycled after deconstruction. This pavilion is sits on reflection pools so having a complete sphere when reflects. Each water bottle was connected with a Light Emitting Diode (LED),so is low energy consumption.

The 2nd precedent studies is come from Reichstag Dome(Germany).

A glass dome Reichstag Building, Berlin by architecture Norman Foster. Symbolizes the reunification of Germany. It is open public and also can be reached by climbing two steel spiraling ramps. Steel and rectangular glass panels.

Action: Aimi Zahirah Binti Zulkarnain

Minute 2: Design Proposal (Floor plan, Elevation, Horizontal and Longitudinal section)

According to the feedback from the lecturer about the design of pavilion, the architecture student are modify the design of the pavilion.The different between the previous design with new design is we already add on the extended louver for sun shading and decoration ( slanted 1⁰-5⁰ )- 500mm and the material for the extended louver is using PU. Architecture student also add on a small courtyard inside the pavilion that connected with the open roof For the other material of this pavilion, we also do some changing and we build it with the reinforced concrete lower beam, reinforced concrete post, rectangle glass panels (LTG), laminated tempered glass (rectangular glass plane of different sizes according to levels), recycled steel frame-work and photovoltaic cell. Then, the area of the pavilion is estimated that is landscape= 10.7m² , gallery= 25.0 m², lounge+ reception= 22.5m², store= 2.5m², porch= 3.3m², total building area= 50.0m² and total building line area= 64.0m². Architecture student also draw the floor plan, elevation, horizontal and longitudinal section of the pavilion.

Figure 8: Design Proposal (Floor plan, Elevation, Horizontal and Longitudinal section)

Action: Aimi Zahirah Binti Zulkarnain

Minute 3: Preparation for the Presentation Crit 1

All the member are transfer the information into the A1 butter paper according to the job scope. For the building technology student is do the construction method report. For this pavilion we use the Industry Building Index (IBS) method. IBS is a modern method construction. It can increase productivity and quantity at construction site and allow more efficient and cost effective. For the proposed foundation( material selection team) ,raft foundation suitable because low bearing capacity soil. The soil settle unevenly when subjected to load. For the glass of the pavilion, we use laminated glass because PVB interlayer keeps the layers of glass bonded & prevent from cracking apart. Construction management student is do the project scheduling and organisation chart. After that, all the member is combine and arrange all the A1 butter paper.

Action : All member

The chairman closes the meeting with remarks of thank you to the members who attend.